Emergency locksmith

Common Reasons for Stuck Door Latches

Common Reasons for Stuck Door Latches

Common Reasons for Stuck Door Latches

Home or office maintenance involves more than cleaning or renovations. You have to plan for repairing roof shingles, door latches, and internal pipes, among many others. A stuck door latch is bothersome to deal with, but the first step to fixing it is knowing what\’s causing the problem. Here are three common reasons why door latches get stuck and possible fixes for them.


Your Latch Has a Misaligned Strike Plate


If the door latch is misaligned, you might find it hard to open the door but have no problems closing it. Misalignment can happen when the door has expanded due to moisture or when the door has an unstable foundation.


You can fix this by moving the strike plate. First, mark the point of contact and widen the hole in both the metal and wood. You could also unscrew the strike and re-screw it where it meets the other side. Note, though, that if you move the strike up, down, or slightly to the side, you might not be able to re-screw it. Holes placed too closely together can compromise screw strength.


A more permanent fix would be to address underlying issues. For example, if wood expansion is the problem, you can redo the door\’s finish to keep moisture from warping the door shape. If the foundation is the problem, you could look into locksmith services.


Your Door Has a Jammed Latch


If you have a jammed latch, it most likely has a build-up of material in the components, which hinders the spring tension. Rust can cause the lock and latch bolt to jam since the excess material fills the gaps that the metallic parts need to move past each other.


Mortise locks, which are common in older homes, are especially prone to rust accumulation. When you have a jammed latch, the best fix is to disassemble and clean it. Submerging the components in a vinegar solution with approximately five per cent acidity should separate the rust and gunk from the metal.


Make sure you submerge the components in the vinegar solution for about a day and use a small brush to scrub out the small nooks and crannies. Also, ensure that you carefully apply car wax or a similar formula to seal the components from future rust. Lock repair service providers


Your Door Has a Broken Internal Mechanism


You can tell if there are broken internal mechanisms if the door latch gets stuck when you manipulate the handle when you try to unlock your door, but the latch slides in and out as it should when you press on it. This shows there isn\’t anything wrong with the latch bolt. With an internal mechanism issue, there could be various causes, and the easiest way to fix this problem is by changing locks, especially if your lock is the type available in a hardware store.


When you decide to change your locks, take the chance to invest in high-quality ones that offer more security. Higher-quality locks need less maintenance and would not break down as quickly.




No one wants to deal with jammed, broken, or stuck door latches. When you have a broken lock, it is best to narrow down what the issue is right away. Get an experienced locksmith to help you diagnose the problem and fix it so that you can get back to your routine as soon as possible.


Trust Locksmith Emergencies with repairing your home or office door locks. We provide locksmith services in London, specialising in smart locks, after burglary repair, rim and night latches, locked doors, UPVC hardware, and more. Contact us today for enquiries!

Leave a Comment

Your email address will not be published. Required fields are marked *